23 February 2013

HAVING A CLEAR OUT

Need more space as the house is overflowing with bike stuff stock at the mo!
All the following items are for sale, open to offers tel 07796553213 and more pics are here - https://picasaweb.google.com/scotbrown1/EBAYITEMS?authkey=Gv1sRgCP6rjun79cr27AE

HED 3 Tri spoke front carbon wheel. SOLD
700c Clincher type rim. Approx 870g. The wheel is in excellent condition, been used for approx dozen 10mile time trials. Hub is perfect condition, no signs of wear in bearings. No damage to carbon anywhere. Running approx 1mm out of true from new.






HED 3D Carbon disc rear wheel. SOLD
700c Clincher type rim. Approx 1390g. Shimano 8/9/10 speed compatiable freehub. The wheel is in excellent condition, been used for approx dozen 10mile time trials. No signs of wear in bearings. No damage to carbon anywhere. Running approx 0.5mm out of true from new.





HED DEEP 90mm Carbon rear wheel 650c SOLD
Shimano 8/9/10 speed. Aero falt blade spokes. Brand new Continental Podium 19mm tublar tyre fitted. Hub in perfect order but please note the following info regarding the rim -THE ALU RIM THAT IS BONDED TO CARBON RIM HAS SPLIT IN A FEW PLACES AND IS COMING AWAY.





Syntace Space Control Brake Levers SOLD

These are made for aerobar type handlebars / tri bars with internal bar-end mounting. Cold-forged, CNC 6000 and 7000-series aluminium construction. These only weigh 184g. Space Control's 20 mm wedge design mounts securely on most aerobars without the use of shims and the bearing-type pivots ensure that the smooth, precise lever. In excellent condition apart from a couple of light scratches to the anodising on the corner of one of the levers. These were £70+ new and are very rare in the UK.


Cinelli Angel bars inc Shimano Dura Ace 9speed bar end shifters and syntace computer mount. SOLD
The Angel is built in aluminium alloy AL 6082 T6. Suitable for 1 1/8” Ahead-Set forks or old 1” with an adaptor (not supplied). The armrests are in aluminium alloy AL 5754, with five small holes to choose the right fixing position on the clamp. The armrests are fixed to the wings with an innovative fixing, rotating system to find the right position. The central extension arms can be adjusted forward and backwards.
These are in used condition and are still working perfect. Please note the following – the outer bar extensions have been cut down and the rear left bar plug is missing (doesn’t affect use). They have also been drilled on the under side for external brake cables or cabling can be internal. (holes can be covered with bar tape). The central extensions have been reduced where the gear shifters are fixed. They have not been cut on the length so there is plenty of adjustment. The arm pads have been zip tied onto the holders as well as the Velcro fasteners. The female nut on the lower stem clamping bolt has been replaced with a nut (this doesn’t affect use and can still be tightened ok). There are a few general light scathes to the anodising with general use.


CANNONDALE MULTISPORT 2000 SI FRAME SET –
CAAD 5 Aero frame with Integrated Aero Carbon forks, Handmade in the USA. Comes with original Campagnolo Record SI Hiddenset headset and original seat collar (never used). Owned from new and purchased from Westbrook Cycles. The frameset is in mint condition and only done approx 300ish miles from new. The frame was fitted with bike shield from new so has no cable rub marks or scratches. There are a couple very minor chips with general use on the lower left fork blade (see additional photos). Very light marks from some heel rub on left bottom stay (only notice them if you are looking hard). See the geometry chart below for exact sizes.
Frameset spec - 68mm English bb, braze on f mech, 27.2mm seatpin

CAAD5 Aero Multisport (700c wheels)

Geometry Chart 56

measured size (cm)* D 53

saddle height minimum (cm)** 69.3

seat tube angle (degrees) A 77

head tube angle (degrees) B 72.5

horizontal top tube length (cm) C 54.0

seat tube overall length (cm) 62.2

chainstay length (cm) E 40.5

fork rake (cm) F 4.3

bottom bracket height (cm) G 26.5

wheelbase (cm) H 100.3

trail (cm) I 6.2

standover at top tube midpoint (cm) J 78.1

bottom bracket drop (cm) K 7.5

front center distance (cm) L 61.0

• For aerodynamics this frame has a top tube lowered by 3 cm with a resulting shorter head tube.

• The measured size is from the center of the bottom bracket to the top of the top tube at the seat tube axis.

• Due to the aero seat tube extension, there is a minimum saddle height measured from the center of the bottom bracket to the top of a Selle Italia Flite saddle.

Our bladed Aero frames are combined with wind-cheating, lightweight Aero carbon fiber forks that offer remarkable vibration-damping abilities.









2 comments: